Concrete Crack Repair & Leak Injection in South Florida
Epoxy, polyurethane and grout injection for condominiums, HOAs, parking garages, seawalls and commercial buildings across Miami-Dade, Broward and Palm Beach.
South FloridaConcrete repair services
Why South Florida properties choose PRS
Protect your investment
We stop water and corrosion before they reach the steel, the units and your property value.
Precision Remediation
Targeted injection repairs cracks in place, no demolition, less noise and dust.
Keep your building open
Phased work, short closures and clear notices keep residents, tenants and cars moving while we repair.
Inspection Ready
Repairs built to your engineer’s specification and documented for SB 4-D and recertification records.
Concrete crack injectionSouth Florida specialists
Specialists, not generalists
PRS is a concrete restoration and injection contractor. We do not paint, roof or remodel. For 27 years our crews have done one thing: find out why concrete is cracking or leaking, and fix it so it stays fixed.
That focus shows up in the work. We carry dedicated injection and grouting equipment that most contractors rent or do without, we know which material each crack needs, and we explain the repair in plain terms before we start.
What we fix
Concrete repair services
Ten specialized repair methods for cracks, leaks, voids and deteriorated concrete. Choose a service to see how it works.
Why concrete cracks here
South Florida is hard on concrete
Most of the cracks and leaks we repair trace back to the same few local conditions. Knowing the cause is how we choose a repair that lasts.
Salt air and chlorides
Coastal air carries chlorides into concrete. They reach the rebar, it rusts and expands, and the concrete cracks and spalls.
High water table
Garages, basements and elevator pits sit in saturated sand. Groundwater pushes through every crack and joint.
Heat and storms
Daily heat cycles open and close cracks, and hurricane-season rain drives water sideways into facades and decks.
Soil washout
Leaking seawalls, pipes and joints wash sand out from under slabs, leaving voids that lead to settlement.
Aging buildings
Many condominium towers are reaching the age where milestone inspections and restoration are due.
Construction defects
Cold joints, honeycombing and tie holes left during construction become leak paths years later.
How we work
From first call to finished repair
Inspect
We visit the site, map every crack and leak, and review any engineer’s report or specification.
Recommend
You get a written scope in plain language: what each crack needs, which material and why.
Repair
Our crew injects, grouts or restores with dedicated equipment and keeps you updated daily.
Verify
We check the work, clean up and document the repairs for your records and inspectors.
Our equipment
Dedicated equipment most competitors don’t carry
Consistent mix ratios and steady pressure are what make an injection repair last. That is why we own the equipment built for it.
Epoxy injection
Lily Corp CD-15
Meters and mixes two-part epoxy at the exact ratio, at steady pressure, for structural crack injection.
Leak injection
Graco ES-290
High-pressure polyurethane pump that drives resin into dense concrete to stop active leaks.
Grout injection
ChemGrout CG550P
Heavy-duty grout plant for void filling, soil stabilization and pressure grouting.
Waterproofing
Graco X7
Airless sprayer for even, consistent coatings and sealers across decks and garages.
Who we work for
Trusted by the people who manage buildings
Condominium associations
Balcony, garage and facade repairs, milestone inspection findings and leak calls from residents.
HOAs
Pool decks, seawalls, walkways and amenity structures across the community.
Property managers
One responsive specialist for leaks and concrete repairs across your portfolio.
Structural engineers
A contractor who builds to your specification and communicates clearly in the field.
General contractors
Specialty injection and waterproofing subcontracting on new and existing structures.
Commercial owners
Garages, warehouses, retail and office buildings kept dry and structurally sound.
Recent work
Projects across South Florida
FAQ
Concrete crack repair questions
How much does concrete crack repair cost in South Florida?
Every project is priced on its scope: the length and width of the cracks, how many there are, access, and the material required. We inspect the site and give you a written estimate at no cost.
Do I need epoxy or polyurethane injection?
Epoxy restores strength in structural cracks that are no longer moving. Polyurethane stops water in leaking or moving cracks. Many buildings need both, and we will explain which repair each crack needs.
Can cracks be repaired without tearing out concrete?
Yes. Injection repairs cracks and leaks in place through small surface or drilled ports, so there is no demolition and areas return to use quickly.
Do you handle SB 4-D milestone inspection repairs?
Yes. We complete concrete restoration, crack injection and waterproofing called for in milestone inspection reports and coordinate directly with the engineer of record.
What areas do you serve?
We serve Miami-Dade, Broward and Palm Beach counties, and we take on projects elsewhere in South Florida. Call us to confirm your location.
Do you work from an engineer’s specifications?
Yes. Much of our work is for engineers, associations and property managers, and we follow the repair specification on every structural project.
Free on-site estimate
Have a crack or a leak? Let’s look at it.
Send us photos or schedule a site visit. We will tell you what is causing it, how we would repair it, and what it will cost. Estimates are free.